|
OPPORTUNITIES IN
VIRGINIA-E&I
SUPERVISOR, SAFETY MANAGER, PAPER MACHINE SUPERVISOR, PULP/POWER
SUPERVISOR, ENVIRONMENTAL ENGINEER, MECHANICAL MAINTENANCE
SUPERVISOR, PAPER MACHINE SUPERINTENDENT. GOOD
LOCATIONS, GOOD OPPTYS FOR GROWTH |
|
|
|
PROJECT MANAGER-DEGREED-
REPORTING HAS NOT BEEN DETERMINED YET(TO THE ENG/MAINT MGR OR CORP
REPORTING). POSITON WILL BE RESP FOR PLANNING AND EXECUTING MAJOR
CAPITAL PROJECTS FOR THE MILL/COMPANY. DUTIES WILL INCLUDE; MANAGE
PROJ DEVELOPMENT FROM BEGINNING TO END, DEFINE PROJ SCOPE, GOALS AND
DELIVERABLES THAT SUPPORT BUSINESS GOALS, DEV FULL-SCALE PROJ PLANS,
ESTIMATE RESOURCES AND PARITICIPANTS NEEDED TO ACHIEVE PROJ GOALS
AND OTHER GENERAL PROJ MGMT DUTIES. LOOKING FOR AN ENGINEER 10 OR
MORE YRS OF PROJ MGMT EXP IN A PAPER OPERATION. COATING PROJ EXP WD
BE A PLUS. ATTRACTIVE NORTH EAST LOCATION |
|
|
|
MAINTENANCE MANAGER-DEGREED-POSITION
REPORTS TO THE MILL MANAGER. PACIFIC NORTHWEST
LOCATION-CALL 800-221-9629 FOR DETAILS |
|
|
|
PULP MANAGER-DEGREED-POSITION
WILL HAVE RESP FOR THE BACK HALF OF THE MILL. PULP MILL AND PWR AND
REC SUPTS REPORT TO THIS POSITION. PACIFIC
NORTHWEST LOCATION. CALL-800-221-9629 FOR DETAILS |
|
|
|
RECYCLED PULP
SPECIALIST-DEGREED-REPORTING TO
THE PULP GROUP MGR, WILL WORK AS INTERNAL CONSULTANT TO THE CO.'S
MILLS FOCUSSING ON RECYCLE PULP OPERATIONS. POSITION IS PART
OF A CORP GROUP INVOLVED WITH OPTIMIZATION, PROJECTS, RUNNABILITY
ISSUES,ETC. LOOKING FOR AN ENGINEER WITH OCC OPERATIONS MGMT EXP
ALONG WITH EXPERTISE IN SCREENING, CLEANING AND REFINING. POSITON
REQUIRES SOME TRAVEL. FLEXIBLE ON LOCATION |
|
|
|
PROCESS CONTROL
ENGINEER-DEGREED-MILL CONVERSION
AND STARTUP. POSITION REPORTS TO THE ENG' AND MAINT MANAGER.
ATTRACTIVE SOUTHEAST LOCATION.
CALL-800-221-9629 FOR DETAILS. |
|
|
|
PROJECT / STARTUP
TECHNICAL ASSISTANTS(1 CHEM ENGR 1 MECH ENGR)-MILL
INSTALLING A NEW PAPER MACHINE AND CONVERTING LINES. THE STARTUP
TECH ASSTS WILL CONTRIBUTE TO ALL DESIGN OF PROCESSES AND ASSEMBLY
ACTIVITIES DURING THE STARTUP PHASE. PRIOR TO STARTUP, WILL WORK
WITH THE MFG TEAM TO DEV THE PROCEDURES AND SUBSEQUENT TRAINING AND
GENERAL WORK INSTRUCTIONS. THIS WILL INCLUDE PROCESS
EXPLANATION, SPECIFIC FUNCTIONS OF EACH PIECE OF EQUIPMENT, OPTIMUM
ADJUSTMENTS(CENTER-LINES), SAFETY PROCEDURES AND QUALITY INSPECTION
ROUTES AND MAINT PROGRAMS AND ROUTES TO BE PERFORMED BY EQUIPMENT
OPERATORS. AFTER STARTUP, THERE WILL BE PERMANENT POSITIONS IN THE
OPERATION FOR THESE TECH ASSTS. SOUTHEAST
LOCATION |
|
|
|
PAPER
MACHINE MAINTENANCE COORDINATOR-DEGREED-REPORTING
TO THE PM MGR, WILL WORK AS A KEY MEMBER OF A CORE TEAM INCLUDING
MAINT AND OPERATIONS SUPERVISION RESP FOR DRIVING THE RELIABILITY
PROCESS ON THE PM ON A DAILY BASIS AND IMPROVING THE RELIABILTY OF
THE MACHINE LONG TERM. LOOKING FOR AN ENGINEER WITH 3-5YRS PM
PROCESS/OPS EXP IN THE PAPER MILL AREA AND AN INTEREST IN PAPER
OPERATIONS. POSITION IS USED AS A SPRINGBOARD TO PM MGMT IN THE
MILL. ATTRACTIVE CAROLINAS LOCATION. |
|
|
|
ASSISTANT UTILITIES
SUPERINTENDENT-DEGREED-REPORTING
TO THE UTILITIES SUPT., WILL BE HIRED TO LEARN THE OPERATION WITH
THE INTENT TO REPLACE A RETIRING SUPT IN A SHORT PERIOD OF TIME.
DUTIES WILL INCLUDE; COORD AND SCHED DAILY MAINT, MAKE ROUNDS ON
EQUIPMENT AND WRITE WORK ORDERS TO PASSPORT, DIRECT AND SUPERVISE
OPERATION OF THE PWR AND REC AREA, SCHED AND PLAN MONTHLY AND ANNUAL
MAINT OUTAGES AND PARTICIPATE IN PLANNING AND EXECUTION OF ALL
CAPITAL PROJECTS IN THE UTILITIES AREA. LOOKING FOR AN ENGINEER WITH
5YRS UTILITIES MGMT EXP AND THE ABILITY TO BECOME THE UTILITIES MGR
IN A SHORT TIME. ATTRACTIVE SOUTHEAST LOCATION
(FL)
|
|
|
|
MAINTENANCE
SUPERINTENDENT-DEGREED-REPORTING
TO THE MAINT & ENG'G MGR, WILL MANAGE, DIRECT AND SUPPORT
THE MAINT ACTIVITIES IN THE SERVICES GROUP, SHOPS, SHIFT AND POOL
AREA AND CARRY OUT OTHER ASSIGNMENTS AS DIRECTED. DUTIES INCLUDE:
SUPERVISE HOURLY AND CONTRACT PERSONNEL-RESP FOR THE CENTRAL
SERVICES GROUP-MACHINE SHOP, SHIFT MAINT GARAGE, FACILITIES,
GROUNDS, CRANES, HEAVY EQUIPMENT OPERATORS, CARPENTER SHOP AND
CONTRACTOR COORDINATION, DESIGN AND IMPLEMENT EQUIPMENT AND
PROCEDURAL IMPROVEMENT TO INCREASE RELIABILITY AND PRODUCTIVITY OF
BOTH EQUIPMENT AND WORKFORCE. LOOKING FOR AN ENGINEER WITH 10YRS
MAINT MGMT EXP WITH HANDS ON EXP IN THE FIELD OF MECHANICAL AND
ELECTRICAL REPAIRS AND A WORKING KNOWLEDGE OF OVERHEAD CRANES, HEAVY
EQUIPMENT, RAILWAYS, ROOFS, MACHINE SHOP EQUIPMENT, ELEVATORS
AND HVAC. ATTRACTIVE SOUTHEAST LOCATION
|
|
|
|
|
|
PAPER MILL
SUPERINTENDENT-DEGREED-REPORTING
TO THE OPERATIONS MANAGER, WILL HAVE RESP FOR THE PAPER MILL AREA.
THREE PM SUPTS REPORT TO THIS POSITION. COMPANY IS GOING TO
SPEND A SIGNIFICANT AMOUNT OF CAPITAL $$ OVER THE NEXT YR IN THE
MILL. LOSUPERVISE HOURLY OKING FOR AN ENGINEER WITH AT LEAST 10 YRS PAPER OPS MGMT
EXP IN BROWN PAPER GRADES. SOUTH LOCATION |
|
|
|
POWERHOUSE
SUPERINTENDENT-DEGREED-REPORTING
TO THE MILL MANAGER, WILL MANAGE ALL ASPECTS OF THE POWERHOUSE,
WASTE TREATMENT AND LANDFILL. RESPONSIBLE FOR DIRECTING THE
OPERATION OF THE POWER BOILERS, POWER DISTIBUTION STATION, TURBINE
GENERATORS, ENERGY MGMT AND AUXILIARY EQUIPMENT. LOOKING FOR AN
ENGINEER WITH 8YRS POWER MGMT EXP IN A PAPERMILL POWER/UTILITIES
AREA. ATTRACTIVE SOUTHEAST LOCATION |
|
|
|
OPERATIONS MANAGER-DEGREED-
REPORTING TO THE VP,GM, WILL HAVE RESPONSIBILITY FOR THE PAPER MILL,
PULPMILL AND UTILITIES AREAS. THE PAPER MGR, PULP MGR AND UTILITIES
MGR REPORT TO THIS POSITION. MILL IS A MULTI-MACHINE OPERATION WITH
THE CAPACITY TO PRODUCE OVER 2000TPD OF BROWN PAPER. LOOKING FOR A
SEASONED MANAGER WITH PAPER OPERATIONS MGMT EXP AND THE ABILITY TO
TO UP TO THE GM POSITION. SOUTH LOCATION |
|
|
|
ENVIRONMENTAL
ENGINEER-DEGREED-REPORTING TO THE
ENVIRONMENTAL MANAGER, WILL ASSIST IN THE DEVELOPMENT AND MAINT OF
SYSTEMS, PROCEDURES AND POLICIES TO ENSURE COMPLIANCE WITH ALL
ENVIRON REGULATORY LAWS, RULES AND PRACTICES. POSITION ALSO PERFORMS
A VARIETY OF TASKS INCLUDING PROCESS ENGINEERING, PERFORMANCE
OPTIMIZATIONS AND TROUBLESHOOTING OF POLLUTION CONTROL DEVICES AND
EMISSIONS MONITORING EQUIPMENT FOR AIR AND WATER EMISSIONS. LOOKING
FOR AN ENGINEER WITH AT LEAST 5YRS ENVIRONMENTAL ENGINEERING EXP
PREFERABLY IN A PULP AND PAPER OPERATION.
PACIFIC NORTHWEST LOCATION |
|
|
|
MECHANICAL ENGINEER-BSME-REPORTING
TO THE ENGINEERING MANAGER, WILL BE RESP. FOR THE MAINTENANCE,
ORGANIZATION, IMPLEMENTATION AND UPDATING OF THE MILL'S EQUIPMENT,
PROVIDE ENG'G SUPPORT FOR PROJECTS AND FAILURE ANALYSIS OF EQUIPMENT
AND PROCESSES. LOOKING FOR AN ENGINEER WITH 5YRS PROJ/MAINT ENG'G
EXP IN A PAPER OPERATION. GOOD PROMO POSSIBILITIES.
ATTRACTIVE PACIFIC NORTHWEST LOCATION |
|
|
|
TURBINE SPECIALIST-DEGREED-WILL
ACT AS THE TURBINE EXPERT FOR THE COMPANY. LOOKING FOR AN ENGINEER
WITH 10YRS OR MORE EXP WITH GAS AND/OR STEAM TURBINES. POSITION
REQUIRES SOME TRAVEL. FLEXIBLE ON LOCATION.
CALL 800-221-9629 FOR DETAILS |
|
|
|
CONSTRUCTION EXPERT-DEGREED-REPORTING
TO THE MANAGER OF THE CORPORATE CONSTRUCTION GROUP, WILL ACT AS AN
INTERNAL CONSULTANT TO CONSTRUCTION TEAMS FROM INCEPTION TO
COMPLETION/STARTUP. POSITION WILL REQUIRE TRAVEL.
CALL 800-221-9629 FOR DETAILS |
|
|
|
SENIOR PROCESS
ENGINEER-DEGREED- REPORTING TO
THE ENG'G AND TECHNICAL MANAGER, WILL OPTIMIZE MILL-WIDE PROCESSES,
LEAD PROCESS UPDATES ON MAJOR CAPITAL IMPROVEMENT PROJECTS,
COMMISSION AND OPTIMIZE NEW PROCESS EQUIPMENT, PERFORM FEASIBILITY
STUDIES FOR NEW PROCESS TECHNOLOGY, FUNCTION CONSOLIDATIONS,
CHEMICAL AND ENERGY SAVINGS AND PRODUCTION IMPROVEMENTS AND COLLECT
AND INTERPRET PROCESS DATA BY COLLECTING, ANALYZING AND SUMMARIZING
INFORMATION AND TRENDS. LOOKING FOR AN ENGINEER WITH 10YRS
PROCESS OPTIMIZATION EXP IN AN INTEGRATED PAPER FACILITY.
PACIFIC NORTHWEST LOCATION |
|
|
|
PROJECT MANAGERS(2)-DEGREED-
REPORTING TO THE MANAGER,CAPITAL PROJECTS, WILL BE RESP FOR PROVIDING
LEADERSHIP AND MGMT DURING THE ENGINEERING, PROCUREMENT AND
CONSTRUCTION(EPC) PHASES OF CAPITAL PROJECTS. POSITION IS A CORPORATE
ROLE PROVIDING PROJ MGMT EXPERTISE TO COMPANY OPERATIONS. LOOKING FOR
AN ENGINEER WITH 10 YRS PROJ ENG'G/MGMT EXP. LARGE PROJ EXP WD BE A
PLUS. POSITIONS REQUIRE TRAVEL. LOCATION IS
FLEXIBLE |
|
|
|
CONTINUOUS
IMPROVEMENT/LEAN MANUFACTURING CONSULTANT-CORPORATE-DEGREED-REPORTING
TO THE DIRECTOR, MANUFACTURING EXCELLENCE, WILL SERVE AS AN IN-HOUSE
CONSULTING RESOURCE TO THE CO.'S MANUFACTURING OPERATIONS AND OTHER
COMPANY BUSINESSES ON THE MANUFACTURING EXCELLENCE PROCESS AND
APPLICATION TOOLS/TACTICS. AS A CONTINUOUS IMPROVEMENT CONSULTANT,
WILL FUNCTION AT THE "BLACK BELT" LEVEL WITH CONTINUOUS IMPROVEMENT
TOOLS, COACH OTHERS IN THE USE OF THE COMPANY ME TOOL BOX(INCLUDES
KAIZEN, KEPNER TREGOE, RCFA AND OTHER METHODS), SUPPORT MILL
CONTINUOUS IMPROVEMENT MGRS AS THEY WORK WITH MILL LEAD TEAMS
THROUGH THE STRATEGY DEPLOYMENT PROCESS, DRIVE SUSTAINABILITY IN ALL
IMPROVEMENT PROJS, ASSIST MILLS AS THEY IMPLEMENT EFFECTIVE USE OF
RAPID IMPROVEMENT TECHNIQUES TO ALL LEVELS OF THE MILL ORGANIZATION
AND ASSIST IN THE EXPANSION OF THE CO. TOOL BOX/METHODS ACROSS THE CO.
ENTERPRISE. LOOKING FOR AN ENGINEER WITH 10-20 YRS EXP
MANAGING/IMPLEMENTING CONTINUOUS IMPROVEMENT PROGRAMS(LEAN AND SIX
SIGMA) AT THE CORP OR MILL LEVEL. POSITION DOES REQUIRE TRAVEL.
LOCATION FLEXIBLE(GENERALLY SOUTH) |
|
|
|
ELECTRICAL
ENGINEER-POWER DISTRIBUTION-BSEE-POSITION
REPORTS TO THE MAINTENANCE MGR. DUTIES AND RESP INCLUDE, RECOMMENDS
THE UPGRADES AND MAINT NECESSARY TO PROVIDE THE LEVEL OF PWR SYSTEM
RELIABILTY EXPECTED AT THE SITE AND MONITORS THE HEALTH OF THE PWR
DISTRIBUTION SYSTEM AND PWR MEASUREMENT DEVICES, OBTAINS BIDS FROM
SUPPLIERS TO ESTABLISH THE FINANCIAL AND SCHED DOWN TIME COST
NECESSARY TO PROVIDE THAT RELIABITY. DEVELOP SWITCHING SCHED TO ALLOW
THE APPROVED UPGRADE ANDS MAINT WORK TO BE ACCOMPLISHED AND POSITION
SERVES AS A SIGNIFICANT RESOURCE WITH REGARD TO "WORK AROUNDS" AND
REPAIRS WHEN PWR DISTRIBUTION FACILITIES EITHER FAIL OR ARE DAMAGED.
LOOKING FOR A BSEE WITH 3-10 YRS WORKING WITH POWER DISTRUTION
EQIPMENT,ETC IN A PULP AND PAPER OPERATION. MUST BE FAMILIAR WITH
TESTING AND REPAIR METHODS OF ELECTRICAL EQUIPMENT UP TO 13.8KV.ATTRACTIVE
SOUTHEAST LOCATION |
|
|
|
TECHNICAL
ASSISTANT/PRODUCTION ENGINEER-PULP, POWER AND RECOVERY-DEGREED-REPORTING
TO THE BACKEND MGR, WILL OVERSEE LARGE AND SMALL PROCESS
DEVELOPMENT/IMPROVEMENTS AND, TRIALS IN THE AREAS, BE RESP FOR ENG'G
PROJS AND PERFORMS PROJ ENG'G WORK AND TRAIN IN THE PRODUCTION
AREAS TO FILL IN FOR ASST SUPTS AS NEEDED. LOOKING FOR AT LEAST 4YRS
PROCESS ENG'G/OPS EXP IN THE PULPMILL OR PWR AND REC AREA. GOOD OPPTY
TO BE TRAINED INTO OPERATIONS. LOUISIANA
LOCATION. |
|
|
|
SENIOR ELECTRICAL
ENGINEER-BSEE-REPORTING TO THE
MAINTENANCE MANAGER, WILL PROVIDE ENGINEERING AND TECHNICAL SUPPORT
FOR ELECTRICAL AND CONTROLS ACTIVITIES IN THE MILL. RESPONSIBILITIES
INCLUDE; OPTIMIZATION AND TROUBLESHOOTING OF DIGITAL AND ANALOG DRIVE
SYSTEMS, POWER DISTRIBUTION SYSTEMS AND MOTOR CONTROLS AND PLC
SYSTEMS. POSITION WILL INTERFACE WITH MILL STAFF TO PROVIDE DESIGN,
ESTIMATING, ENGINEERING AND IMPLEMENTATION OF OF PROJECTS IN THE
ELECTRICAL AND CONTROLS AREAS. LOOKING FOR AN EE WITH 5-10 YRS PROJ
AND MAINT ENG'G EXP IN AN INTEGRATED PAPER OPERATION.
PACIFIC NORTHWEST LOCATION |
|
|
|
PRODUCTION
ENGINEER-POWER AND RECOVERY-DEGREED-
REPORTING TO THE UTILITIES MANAGER, WILL WORK AS A TECH RESOURCE FOR
THE AREA. DUTIES WILL INCLUDE; OPTIMIZING PROCESSES, TROUBLESHOOTING
PROBLEMS AND PROVIDING TECHNICAL SUPPORT FOR PROJECTS INVOLVING NEW
AND EXISTING SYSTEMS(ANALYSING DATA, ASSIST/DIRECT PRODUCTION TEAMS,
DEV AND IMPLEMENT NEW STRATEGIES AND TECHNOLOGIES AND IMPLEMENT
CAPITAL PROJECTS). LOOKING FOR AN ENGINEER WITH AT LEAST 5YRS POWER
AND RECOVERY OPERATIONS/TECH EXP IN A PULP AND PAPER FACILITY.
SOUTH LOCATION |
|
|
|
SENIOR
PROCESS/OPERATIONS ENGINEER-TISSUE-DEGREED-REPORTING
TO THE TISSUE MILL MANAGER, MILL PROVIDE PROCESS ENG'G SUPPORT TO
LIGHT CREPE AND THROUGH AIR-DRIED TECHNOLOGY EQUIPMENT AND PROCESSES
FOR THE PAPER MILL. POSITON IS ALSO RESP TO PROVIDE ENG'G LEADERSHIP
TO OPERATIONS AND TO PARTICIPATE IN THE DEVELOPMENT OF SKILL LEVELS IN
OPERATORS. LOOKING FOR AN ENGINEER WITH 3-7 YRS OF TECH AND OPERATIONS
EXP IN A TISSUE MANUFACTURING FACILITY INCLUDING 3YRS EXP WITH TAD
TECHNOLOGY. EAST LOCATION |
|
|
|
CHEMICAL
RECOVERY/BOILER SPECIALIST-DEGREED-
REPORTING TO THE GROUP MANAGER, WILL PROVIDE TECH EXPERTISE TO THE
MILLS SPECIALIZING IN THE CHEMICAL RECOVERY PROCESS AND CHEMICAL
RECOVERY BOILERS. WILL WORK ON PROJECTS, TROUBLESHOOT PROBLEMS,
OPTIMIZE THE PROCESS AND GENERALLY BE THE "GO TO PERSON" FOR ANY
CHEMICAL RECOVERY/BOILER NEEDS THAT THE COMPANY'S MILLS MIGHT HAVE.
LOOKING FOR AN ENGINEER WITH AT LEAST 10YRS CHEMICAL RECOVERY
OPERATIONS MGMT EXP AND, ALONG WITH RECOVERY EQUIPMENT EXPERTISE, HAS
EXPERT KNOWLEDGE OF THE RECOVERY PROCESS. POSITION REQUIRES TRAVEL.
FLEXIBLE ON LOCATION |
|
|
|
PAPER MILL
SUPERINTENDENT-DEGREED-REPORTING TO
THE PRODUCTION MANAGER, WILL BE RESP FOR THE OPERATION AND MGMT
ACTIVITIES IN THE PAPER MILL AREA CONSISTING OF 2 PM'S AND ANCILLARY
EQUIPMENT. TWO(2) ASST SUPTS, SHIFT SUPVRS AND A PRODUCTION ENGINEER
DIRCTLY REPORT TO THIS POSITION. LOOKING FOR A SEASONED PAPER MGR WITH
AT LEAST 10YRS PAPER SUPERVISORY EXP ON HI-SPEED PM'S.
CALL 800-221-9629 FOR LOCATION AND DETAILS |
|
|
|
PROJECT ENGINEER-BSME-REPORTING
TO THE ENGINEERING MANAGER, WILL BE RESP FOR THE EXECUTION AND
IMPLEMENTATION OF CAPITAL PROJECTS FOR THE MILL. SPECIFIC RESPS
INCLUDE; SCOPE DEVELOPMENT, EVA/IRR ANALYSIS, CONSTRUCTION MGMT, MEET
WITH INTERNAL CUSTOMERS AND DEV PROJ TEAM GOALS, CONSIDER AND
SELECT ALTERNATIVES, SUBMIT REPORTS FOR FUNDING AND LEAD CONSULTING
ENG'G SERVICES FOR STUDIES AND PROJECT DESIGN. LOOKING FOR AN ENGINEER
WITH 5-15 YRS PROJECT ENG'G/MGMT IN A PULP AND PAPER OPERATION.
PACIFIC NORTHWEST LOCATION |
|
|
|
SENIOR PROCESS
CONTROL ENGINEER-DEGREED- REPORTING
TO THE MGR, TECNICAL SERVICES, WILL PROVIDE HIGH-LEVEL SYSTEMS
EXPERTISE AND APPLY ADVANCED PROCESS CONTROL TECHNIQUES FOR PROCESS
OPTIMIZATION. DUTIES INCLUDE; ASSURE CONTROL SYSTEMS PERFORMANCE AND
INTEGRITY, MANAGE EQUIPMENT OTHER ENGINEERS/VENDORS, DESIGN, IMPLEMENT
AND/OR PROGRAM DCS/PLC AND OITHER SYSTEMS, PERFORM SYSTEM
ADMINISTRATOR FUNCTIONS, DEVELOP STANDARDS AND PROCEDURES AND
TRAINING. LOOKING FOR AN ENGINEER WITH AT LEAST 7 YRS RELEVANT PROCESS
CONTROL SYSTEMS EXP. DELTA V, PROVOX AND ALLEN BRADLEY EXP WD BE A
PLUS. PACIFIC NORTHWEST LOCATION |
|
|
|
OPERATIONS/TECHNICAL
SPECIALIST-CONTINUOUS DIGESTERS-DEGREED-REPORTING
TO THE GROUP MANAGER, WILL BE PART OF A CORP GROUP PROVIDING
OPERATION, PROCESS AND ENGINEERING TECHNICAL ASSISTANCE TO CO. MILLS
WORLDWIDE. POSITION PROVIDES EXPERT TECHNICAL SUPPORT FOR VARIOUS
CONTINUOUS DIGESTER PROCESSES THE CO. HAS IN OPERATION AND ALSO
PROVIDE TECH AND OPERATION SUPPORT TO OTHER ARES OF FIBER MFG
PARTICULARLY TO THOSE AREAS THAT INTERFACE WITH DIGESTERS. LOOKING FOR
AN ENGINEER WITH AT LEAST 10YRS PULP OPERATIONS EXP THAT CAN FUNCTION
AS AN INTERNAL CONSULTANT TO MILLS TO DEVELOP PROJECTS AND PRODUCE
IMPROVEMENT IN PULPING OPERATIONS PARTICULARLY IN THE CONTINUOUS
DIGESTER AREA. POSITION DOES REQUIRE TRAVEL.
FLEXIBLE ON LOCATION |
|
|
|
SENIOR PROJECT ENGINEER-BSME-REPORTING
TO THE ENGINEERING MANAGER, WILL PROVIDE ENGINEERING SUPPORT TO MILL
OPERATIONS IN THE DEVELOPMENT AND SCOPE OF CAPITAL AND LARGE MAINT
PROJECTS AND ICMPLEMENTATION OF APPROVED PROJECTS FROM DESIGN TO
CONSTRUCTION. LOOKING FOR AN ME WITH 5-10 YRS MILL PROJECT ENG'G
EXP PARTICULARY IN THE UTILITIES(STEAM, BOILERS, GENERATION) AREA. PACIFIC
NORTHWEST LOCATION
|
| |
Canadian and Overseas Jobs |
|
OPPORTUNITIES IN QC-COMPANY
SPENDING $$ LOOKING FOR TWO KEY MANAGERS;
MAINTENANCE MANAGER
AND
POWER AND RECOVERY
MANAGER.
|
|
PULP MILL PROCESS ENGINEER-DEGREED-REPORTING
TO THE MGR,TECH SVCS, WILL PROVIDE TECHNICAL SUPPORT TO THE
PRODUCTION AREA. DUTIES INCLUDE; QUALITY CONTROL, TROUBLESHOOTING
PROBLEMS, FEASIBILITY STUDIES FOR PROJECTS AND OPTIMIZATION. LOOKING
FOR AN ENGINEER WITH 3-8YRS PROCESS ENGINEERING EXP IN A MODERN PULP
OPERATION. ALBERTA LOCATION |
|
KRAFT MILL SUPERVISOR-DEGREED-
REPORTING TO THE PULP MGR, WILL HAVE RESP FOR THE PULP MILL ON
SHIFT(4 ON-4 OFF). LOOKING FOR AN ENGINEER WITH 3YRS KRAFT PULP
OPERATIONS EXP OR TECH EXP IN THE KRAFT MILL AND AN INTEREST IN PULP
OPERATIONS. GOOD PROMO OPPTYS. ATTRACTIVE BC
LOCATION |
|
MAINTENANCE SUPERINTENDENT-FIBERLINE-DEGREED-REPORTING
TO THE MAINT MGR, WILL BE RESP FOR THE FIBERLINE MAINT TEAMS. MILL
IS A NON-UNION OPERATION. APPROX 20 SALARIED AND HRY EMPLOYEES
REPORT TO THIS POSITION. LOOKING FOR AN ENGINEER OR TRADE WITH 5-10
YRS MAINT MGMT EXP IN A MODERN BL KR PULP OPERATION. GOOD PROMO
POTENTIAL. ALBERTA LOCATION |
|
ELECTRICAL AND INSTRUMENTATION
SUPERINTENDENT-BSEE-REPORTING TO
THE MAINT AND ENG'G MANAGER, WILL BE RESP FOR ALL ELECTRICAL AND
INSTRUMENTATION INCLUDING IT AND PROCESS CONTROL FOR THE
FACILITY. POSITION SUPERVISES 6 STAFF AND APPROX 45 HRLY EMPLOYEES.
LOOKING FOR AN ELECTRICAL ENGINEER WITH 10 YRS E&I MGMT EXP IN AN
INTEGRATED PAPER FACILITY. ATTRACTIVE BC
LOCATION |
|
PAPER MACHINE MANAGER-DEGREED-
REPORTING TO THE PRODUCTION MANAGER, WILL HAVE FULL RESP FOR THE
OPERATION OF ONE PAPER MACHINE AND ANCILLARY EQUIPMENT. AN ASSISTANT
SUPT AND SHIFT SUPERVISORS REPORT TO THIS POSITION. LOOKING FOR AN
ENGINEER WITH 7-10 YRS PM MGMT EXP ON MODERN, HI-SPEED PAPER
MACHINES. WESTERN CANADA LOCATION.
|
|
PROJECT ENGINEER-DEGREED-REPORTING
TO THE ENGINEERING MGR, WILL PROVIDE ENGINEERING AND PROJECT MGMT
SERVICES TO IMPLEMENT ASSIGNED CAPITAL AND EXPENSE PROJECTS. EMPHASIS
WILL BE ON PROJECT SCOPE DEVELOPMENT, PROJECT APPROVAL PROCESS AND
MGMT OF PROCUREMENT AND CONSTRUCTION ACTIVITIES. DILIGENT MGMT OF
PROJECT SCHEDULES, BUDGETS AND SCOPES IS ESSENTIAL TO BE SUCCESSFUL IN
THE POSITION. PROJECTS ARE MANAGED FROM INCEPTION TO COMPLETION.
LOOKING FOR AN ENGINEER WITH AT LEAST 4YRS PROJECT ENG'G/MGMT EXP IN A
PULP OPERATION. WESTERN CANADA LOCATION |
|
OVERSEAS
PROJECT MANAGER-DEGREED-15-20YRS
PROJ MGMT EXP MANAGING PROJECTS OF $300-500MM RANGE.
CALL 800-221-9629 FOR DETAILS |
|
RELIABILITY MAINTENANCE ENGINEER-DEGREED-REPORTING
TO THE MAINT MGR., WILL DEVELOP AND IMPLEMENT STRATEGIES AND
PREDICTIVE TECHNOLOGIES TO IMPROVE THE PRODUCTION FACILITIES, ENSURE
SAFE OPERATION, EQUIPMENT RELIABILITY/AVAILABILITY, COST EFFECTIVE
MAINT, CONTINUOUS IMPROVEMEMNT CULTURE AND REG COMPLIANCE. LOOKING FOR
AN ENGINEER WITH 5-10YRS MAINT RELIABILITY ENG'G EXP IN A PULP AND/OR
PAPER OPERATION. COASTAL BC LOCATION |
|
E & I ENGINEER-BSEE-
REPORTING TO THE SERVICES MGR, WILL BE RESP FOR THE ELECTRICAL SIDE OF
ASSIGNED CAPITAL AND MAINT PROJECTS INCLUDING HIGH VOLTAGE SYSTEMS,
MOTOR CONTROLS AND POWER DISTRIBUTION AS WELL AS ROBOTICS AND
AUTOMATION APPLICATIONS. LOOKING FOR 3-10YRS ELECTRICAL ENG'G EXP IN
PULP AND/OR PAPER OPERATION. BC LOCATION |
|
SENIOR PROCESS ENGINEER-PULPING/BLEACHING-DEGREED-REPORTING
TO THE TECHNICAL MANAGER, WILL PROVIDE TECHNICAL EXPERTISE TO THE PULP
MILL. DUTIES INCLUDE; TROUBLESHOOTING PROBLEMS, OPTIMIZATION OF
PROCESS/EQUIPMENT AND IMPROVMENT AND COST REDUCTION. LOOKING FOR
AN ENGINEER WITH 5-15YRS PROCESS ENGINEERING EXP IN A BL KRAFT PULP
OPERATION. ATTRACTIVE EASTERN CANADA LOCATION.
|
|
TECHNICAL ASSISTANT-POWER & RECOVERY-DEGREED-
REPORTING TO THE UTILITIES MANAGER, WITH PROVIDE TECHNICAL EXPERTISE
TO THE UTILITIES AREA. DUTIES WILL INCLUDE, OPTIMIZATION OF EQUIPMENT,
TROUBLESHOOTING PROBLEMS, INVOLVEMENT IN ENERGY REDUCTION INITIATIVES
AND FILLING IN FOR MGMT AS NEEDED. LOOKING FOR AN ENGINEER WITH 3-12
YRS OF TECHNICA/PROCESS ENGINEERING EXP IN THE PULP/UTILITIES
AREA OF A PULP AND PAPER OPERATION. EASTERN
CANADA LOCATION |
|
POWER AND RECOVERY SUPERINTENDENT-1ST
CLASS STEAM TICKET- REPORTING TO THE UTILITIES MANAGER, WILL DIRECT
AND MANAGE THE STEAM AND RECOVERY DEPT. INCLUDING EVAPS, LIQUOR
RECOVERY BOILER, RECAUST PLANT, HOG FUEL BOILERS AND TURBINE
GENERATORS AND HOG FUEL SUPPLY SYSTEMS. LOOKING FOR A 1ST CLASS STEAM
ENGR WITH 10YRS UTILITIES MGMT EXP IN A PULP AND PAPER OPERATION.
ATTRACTIVE ONTARIO LOCATION |
|
MAINTENANCE SUPERVISOR-PULP MILL-REPORTING
TO THE MECHANICAL MAINT SUPT., WILL BE RESP SUPERVISING AND COORD
MAINT IN AN AREA OF THE MILL. POSITION WILL SUPERVISE UP TO 15 TRADES.
LOOKING FOR AN EXPERIENCED ENGINEER OR TRADE WITH 5YRS PULP MILL MAINT
SUPERVISORY EXP THAT CAN MOVE UP TO THE MAINT SUPT POSITION IN THE
FUTURE.ONTARIO LOCATION
|
|
PULP MILL PROCESS ENGINEER-DEGREED-
REPORTING TO THE TECHNICAL SERVICES SUPT., WILL PROVIDE PROCESS ENG'G
SUPPORT FOR QUALITY AND PRODUCTIVITY IMPROVEMENT INITIATIVES, COST
REDUCTION ACTVITIES AND ENVIRONMENTAL IMPROVEMENT EFFORTS. LOOKING FOR
AN ENGINEER WITH 4-10YRS PROCESSENG'G EXP IN A BL KRAFT PULP
OPERATION. ONTARIO LOCATION |
|
MANAGER-POWER AND RECOVERY-DEGREED
AND/OR STEAM TICKET-REPORTING TO THE MILL MANAGER WILL BE RESP FOR
PROVIDING HIGH QUALITY,LOW COST STEAM/POWER SUPPLY TO THE SITE
OPERATING/BUSINESS UNITS AND SITE SERVICE AREAS AS WELL AS ENSURING
SITE ENERGY CONSUMPTION IS MINIMIZED. POSITION SUPERVISES A SUPT. PWR
AND RECOVERY,AN ASST SUPT PWR AND RECOVERY, 2 TECHNICAL ASSTS AND
MAINT PERSONNEL. LOOKING FOR AN ENGINEER OR STEAM ENGINEER WITH
10YRS PULP/UTILITIES OPERATIONS MGMT EXP OR ENG'G/MAINT MGMT WITH PROJ/MAINT
EXP IN THE UTILITIES AREA. CALL 800-221-9629 FOR
DETAILS |
|
SYSTEMS/PROCESS CONTROL ENGINEER-DEGREED
OR EXP-REPORTING TO THE E & I SUPT., WILL BE RESP FOR MAINTAINING AND
SERVICING THE DCS AND PLC SYSTEMS AND OTHER RELATED SYSTEMS ON SITE.
DUTIES WILL INCLUDE; PREP FEASIBILITY STUDIES AND CAPITAL SPENDING
REQUESTS, DEV AND CONDUCT A PREV MAINT PLAN FOR THE DCS AND PLC
SYSTEM, TROUBLESHOOT PROBLEMS AND WORK WITH PROCESS ENGRS AND E & I TO
IMPROVE MILL PROCESSES THROUGH IMPLEMENTATION OF ADVANCED CONTROL AND
OPTIMIZATION OF CURRENT PRACTICES. LOOKING FOR AN ENGINEER WITH 5YRS
EXP IN DCS MGMT. FOXBORO AND MODICON EXP WD BE A PLUS.
ATLANTIC CANADA LOCATION |
|
RELIABILITY ENGINEER-UTILITIES-BSME-REPORTING
TO THE UTILITIES MGR, WILL PROVIDE RELIABILITY SUPPORT SERVICES TO THE
UTILITIES AREA. DUTIES INCLUDE; IMPLEMENTATION AND EXECUTION OF A
PREVENTATIVE AND PREDICTIVE MAINT PROGRAM, PERFORM ROOT CAUSE ANALYSIS
AND ELIMINATION, PARTICIPATE IN SHUTDOWN COORDINATION, DEVELOP AND
IMPLEMENT MAINT PROCEDURES AND TROUBLESHOOTING GUIDLINES TO SUPPORT
CONSISTENCY AND EFFICIENCY AND ENSURE MODIFICATIONS, REPAIRS AND
INSPECTIONS OF POWER PIPING, PRESSURE VESSELS AND SAFETY VALVES ARE
PERFORMED IN COMPLIANCE WITH THE ASME CODE. LOOKING FOR AN ENGINEER
WITH RELIABILITY/MAINT TRAINING AND SKILLS IN A PULPMILL/UTILITES AREA
OF AN OPERATION. ATLANTIC CANADA LOCATION |
|
SHIFT SUPERVISOR-STEAM & RECOVERY(2)-2ND
CLASS STEAM TICKET-- REPORTING TO UTILITIES MANAGER, WILL HAVE RESP
FOR THE STEAM AND RECOVERY AREA ON SHIFT(4 ON-4 OFF). POSITION
SUPERVISES AND COACHES OPERATING AND MAINT EMPLOYEES. LOOKING FOR A
2ND CLASS ENGINEER WITH 3-8YRS OPERATING/SUPERVISING EXP IN THE
UTILITIES AREA(STEAM AND RECOVERY. ATLANTIC
CANADA LOCATION |
